HCMJ cylinder with box

Generally, it is composed of a cylinder block, a cylinder rod and a seal. The interior of the cylinder block is divided into two parts by a piston, and each has an oil hole.

Because the compression ratio of the liquid is very small, when one of the oil holes is filled with oil, the piston will be pushed to make the other oil hole out of the oil. The piston will drive the piston rod to extend (retract) and vice versa.
 
Through the manual booster stalk (hydraulic manual pump), the hydraulic oil enters the cylinder through a single-term valve. At this time, the hydraulic oil that enters the cylinder cannot be reversed back because of the single-term valve, forcing the cylinder rod upward, and then continuing to work After entering the Hydraulic Cylinder, it keeps rising up, and when it is going down, it opens the Hydraulic Valve to return the hydraulic oil to the oil tank.

Advantages of HCMJ cylinder with box:
1. Small size, saving installation space, standardized specifications
2. Direct installation without other accessories
3. Applicable to mechanical occasions where mold, processing jig or installation space is restricted