Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
(Total 12 Products for Roller Vane Pump)
High Pressure Fixed Capacity Vane Pump
Product Features 1. High Pressure Fixed Capacity Vane Pump is a new product, with structural rationality, advanced performance. 2. High efficiency, low noise, low ripple, and good reliability 3. Widely used in machine tools, plastic machinery, forging machinery, engineering machinery, transportation machinery and...
Automatic Hydraulic Solenoid Valve
Choose a solenoid valve by environmental conditions:
The maximum and minimum temperature of the environment should be selected within the allowable range. If there is any excess, a special order should be made.
When the relative humidity in the environment is high and there are water droplets and rain, etc., the...
Vertical Quantitative Vane Pump Oil Pump Station
Order No.: 0022168 Brand: Jinzhuang hydraulic Article No.: 0098621 Model: 5.5kw-210kg Type: hydraulic transmission system Motor power: 5.5 (kw) Rated pressure: 140 (MPA) Rated flow: 21 Tank capacity: 80 (L) Applicable medium: 68 anti-wear hydraulic oil Nominal pressure: 21 (MPA) Material: Cast Iron
Low Pressure Variable Capacity Vane Pump
Low Pressure Variable Capacity Vane Pump hydraulic oil pump industrial vane pump High pressure and high performance dowel pin type vane pumps are widely used for plastic machinery,casting machinery,metallurgy machinery,pressing machinery,refining machinery,construction machinery,marine-Machinery Features 1.With dowel...
High Pressure Variable Capacity Vane Pump
High pressure variable capacity vane pump Features 1.With dowel pin vane structure,it can work in high pressure,low noise and long lifetime. 2.This vane pump can fit wide viscosity hydraulic medium,and be xtarted at low temperature and work at high temperature. 3.As the vane pump adopts bilabial structure vane,it has...
Low Pressure Double Variable Capacity Vane Pump
Description Low Pressure Double Variable Capacity Vane Pump with internal by-pass valve. The pumps use a rotor with sliding vanes to draw the liquid. The material of construction is nodular iron with sliding vanes built in a special self lubricating material. Due to its efficiency the pumps can handle viscous and also...
Variable displacement piston pump in construction machinery
Variable displacement piston pump in construction machinery The vane pump is a pump in which the vanes in the rotor groove are in contact with the pump casing (stator ring), and the sucked liquid is pressed from the oil inlet side to the oil discharge side. Common faults 1. The output flow of hydraulic pump is...
Variable plunger pump for machinery
Variable plunger pump for machinery The plunger pump is an important device of the hydraulic system. It relies on the reciprocating movement of the plunger in the cylinder to change the volume of the sealed working chamber to achieve oil absorption and pressure. The plunger pump has the advantages of high rated...
Widely used hydraulic gear pump
When the gear pump is working, the driving wheel rotates with the motor and drives the driven wheel to rotate. When the meshing teeth on one side of the suction chamber gradually separate, the volume of the suction chamber increases and the pressure decreases, and the liquid in the suction pipe is sucked into the...
High pressure hydraulic vane pump
The vane pump is a pump in which the vanes in the rotor groove are in contact with the pump casing (stator ring), and the sucked liquid is pressed from the oil inlet side to the oil discharge side. Almost all vane pumps refer to centrifugal pumps, mixed flow pumps, axial flow pumps, etc. According to whether its...
Constant volume vane pump for punch press
When the rotor of the vane pump rotates, under the action of centrifugal force and pressure oil, the tip of the vane is tightly attached to the inner surface of the stator. In this way, the working volume formed by the two blades, the inner surface of the rotor and the stator, first sucks oil from small to large, and...
Easy-to-operate high-pressure vane pump
Working principle of single-acting vane pump:
The pump is composed of rotor 1, stator 2, blades 3, oil distribution plate and end cover. The inner surface of the stator is a cylindrical hole. There is an eccentricity between the rotor and the stator. The blades can slide flexibly in the slots of the rotor. Under the...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.